The Terminator mini-bust for Watsoncon. Based on the T800’s appearance in TERMINATOR 2: Judgment Day, this 1/6th scale mini-bust was sculpted with Sculpey Firm over an aluminum foil and apoxie armature, set on a wood-block based (which has been distressed to look like it’s taken gunfire). Photos by Tony Martins Photography.
In his column for The Robot’s Voice, my friend Jim Dandeneau posted a link to GALACTUS IS COMING, the Stan Lee/ Jack Chick mashup that Ed Conley wrote and I drew nine years (!) ago. Still one of my happiest, most satisfying collaborations, you can read the while thing here.
Here are my 2015 Boston Comic Con commissions! People made requests and I did my best to sculpt them on the fly. I got a great bunch this year (click to enlarge):
Plus I made few other pre-prepared pieces (click to embiggen):
Squirrel Girl (and Tippy Toe!), Spider-Gwen, Ms. Marvel, and Batman reliefs.
Thanks to everyone who visited!
I’ll be at the BOSTON COMIC CON FRIDAY – SUNDAY JULY 31 – AUGUST 2, 2015, and I’ll be taking commissions for and producing mini-busts and reliefs right there at the con. Mini-busts are approximately 1/6th scale (about 3″ in height), made of durable gray polymer clay and epoxy. You pick the character and I’ll make them, and can take it home with you bubble-wrapped and boxed.
Mini-busts are $60 each at the con, BUT if you’d like to pre-order and they’re only $50!
This year I’ll also be offering sculpted reliefs. Reliefs will come mounted on ready-to-hang wooden plaques, and will approximately the same size and height as the mini-busts.
Relief sculptures are $50, but preorder and they’re only $40! And they come with read-to-hang wooded plaques.
Contact me here, on tumblr tweet me @jfsculpts, or email me at jfsculptsemail01@gmail.com.
Mini-busts: 
Reliefs (pictured here mostly without plaques):
Reliefs look like this from the side:
PLUS (hold onto your butts!) I will have three NEW, PRE-PAINTED MINI-BUSTS of some favorite characters for sale for the con-special price of $75 (normally $100).
I’m sharing a table once again with my friend and frequent collaborator Sean Downey.
See you at the con!
Marvel’s Mutant fremenies mini-busts for my friend Kait’s birthday. These were made with Sculpey Firm and Apoxie over an aluminum armature, finished with black matte spray primer and silver and metallic red leaf. The X emblem in the stand was hand-carved, stained, and polyurethaned. Each bust is about 3″ high.
Professor Charles Xavier and Magneto were created by Stan Lee and Jack Kirby.
THE UNBEATABLE SQUIRREL GIRL a.k.a. Doreen Green, is Marvel Comics’ heroine who possesses all the powers of squirrel and girl, seen here charging into action, with her best friend Tippy Toe at the ready.
Designed by my friend Erica Henderson, current artist of USB, whom I pestered for this design as soon as she was announced as the artist. (Erica and I have collaborated before.) It was designed to be in-scale with the Batgirl Black & White sculpture I did, and is about 7″ high by 11″ long (Tippy Toe is about the tiniest thing I’ve ever sculpted and I had to bust out the magnifying lamp to work on her). It was sculpted with Sculpey Firm, Apoxie Sculpt, and the finished piece was cast using Smooth On Mold Star 30 and Smooth Cast 305.
Erica, writer Ryan North, and colorist Rico Renzi are creating some of the most fun, exciting, and fresh superhero comics in years. A collected edition of the first story will be on sale August 19th at your finer comic book shops!
The Unbeatable Squirrel Girl was created by Will Murray and the legendary Spider-Man co-creator Steve Ditko.
In the Old West, two desperadoes took refuge in a hidden California valley. One shot a “funny-lookin’ chicken” and roasted it for their dinner.
His compatriot was sick with a bad cold and had no appetite for the weird meat.
Little did the bad men know some very hungry chickens were already hunting them…
Inspired by Ray Harryhausen’s VALLEY OF GWANGI (which I’ve still never seen all the way through), my own take on two great icons of the American West, Cowboys and Dinosaurs.
This diorama is 2 1/2′ X 2 1/2′ across. The cowboys, dog, horses and dinosaurs were all made from Super Sculpey over an aluminum armatures. Lots of research went into cowboy gear, animal anatomy, paleontology (particularly the work of Gregory S. Paul), and the Navajo blanket worn by the sick cowboy, only to ignore all of it where it’d make for better drama.
This is an older piece I never photographed before. It was built to be viewed in person, in the dark, and I hope it translates into photos. Thanks to Sean Downey for his assistance in preparing this piece to shoot.
Last year I auctioned a sculpture commission to raise money for a friend. Within moments a kind soul bid (a fair bit over the minimum, too) and won his choice of anything he wanted me to sculpt.
And then he asked for something awesome.
In 1972, a crack commando unit was sent to prison by a military court for a crime they didn’t commit. These men promptly escaped from a maximum security stockade to the Los Angeles underground. Today, still wanted by the government, they survive as soldiers of fortune. If you have a problem, if no one else can help, and if you can find them, maybe you can hire the A-Team.
The A-TEAM, created by Frank Lupo and superproducer Stephen J. Cannell was supposedly the most violent show on TV when it was airing in the mid-1980s, but I don’t remember a lot of bloodshed or onscreen death. When I was asked to replace the presidents on Mount Rushmore with these four great American heroes, I felt I was asked to solve a problem and no one else could help.
Created in 1939 (one month after Superman first appeared) by writer Gardner Fox and and artist Bert Christman, Wesley Dodds was a somnambulist-turned-superhero who wore an eerie gas mask and used a sleep-inducing gas gun, a kind of nonlethal variation on the Shadow. Inspired by the success of Neil Gaiman’s SANDMAN series (Gaiman’s Sandman being inspired by the earlier iteration) Wesley Dodds was revived in 1993 by writers Matt Wagner and Steven T. Seagle and artist Guy Davis in Vertigo’s SANDMAN MYSTERY THEATER, a moody crime comic set in the late ’30s.
SANDMAN MYSTERY THEATER artist Guy David depicted the Sandman’s alter ego Wesley Dodds and his girlfriend and confidant Dian Belmont as a rumpled, bookish, roly-poly couple, unusual for mainstream comics. I was inspired by Davis’ interpretation of the Sandman, as well as the rotund, overcoat-wearing protagonist of a Moebius story, To See Naples.
This piece was sculpted with a gray mix of Super-Sculpey and Sculpey III over an aluminum armature, molded in Smooth-On Oomoo 30, cast in Smooth-Cast 300, primed and painted with acrylic paints and accented with chalk and pastels. The finished piece stands about 7″ high.
A number of folks helpfully pointed out that this site’s old banner was, in point of fact, a painting. And just maybe, for a site called “JFSculpts,” it’d be more fitting to present a sculpture. And to these folks I’d usually say “You’re not my real dad!”
But they were right. (Not about being my dad, but about the painting thing.)
So I made a new banner incorporating myself (far right) and Gussy, Big Jerk of a Little Bear (far left) on a glowy banner.
First the sculptures, which were reliefs done in Sculpey Firm and Sculpey III. They were then primed:
Painted…
Then, incorporating a trick from the opening titles of John Carpenter’s THE THING, I cut out banner letters and placed them in from of a glowing surface:
(That’s my computer monitor.)
Everything was photographed separately, then I put it all together in Photoshop, and here we are.
JFsculpts 
